Before starting the build, check that you have all the required tools:
- Soldering iron
- Soldering tin
- TX10 (M3) Torx screw driver (a flat head will also work)*
- TX20 (M4) Torx screw driver (a flat head will also work)
- Cutting pliers
- Tweezers (normally closed recommended)
*A TX10 screwdriver is not required for the Scylla, TBK Mini, Skeletyl.
We also recommend the following tools:
- multimeter
- desoldering pump (mistakes happen)
Also make sure to check the contents of the package carefully to make sure that everything is there.